Christmas light controller We get a lot of tips about Christmas light controllers but rarely do they contain the kind of juicy detail that [Vince Cappellano] included with his setup. His video explaining the controller he built is embedded after the break and it’s not to be missed. We think there’s a lot of good design invovled [...]
GSM hacking with prepaid phones Want to listen in on cellphone calls or intercept test messages? Well that’s a violation of someone else’s privacy so shame on you! But there are black-hats who want to do just that and it may not be quite as difficult as you think. This article sums up a method [...]
iPod nano 6g closer to being cracked [Steven Troughton-Smith] figured out how to push signed firmware through to the iPod Nano 6g. This is accomplished by modifying iRecovery to recognize the device on the USB after forcing a recovery mode reboot. So no, this doesn’t mean that it has been cracked since it checks the firmware you [...]
Jumbo Size New Years Countdown New Years celebrations tend to get bigger and bigger every year for most people, and [Brian] takes no exception. In order to top his lighted tree of a few years ago, he has concocted a 40′x40′ set of Seven-Segment displays made out of Christmas lights, hung from nearby trees. These [...]
MIT Inspired Impromptu SegStick If many of the readers out there longed for a Segway for Christmas but Santa didn’t bring you one, you are in luck. The aptly named Seg-Stick by [scolton] is a great way for cheap transportation. It uses a broomstick, along with two DeWalt cordless drills to power this bad boy [...]
Hackaday links: December 26, 2010 Obligatory tech tree It’s hard to let a Christmas go by without looking in on a geeky Christmas tree project. Luckily, [Peter Davenport] decided to share his Arduino and LCD shield tree. Blinking USB dude If you’ve got a 555 timer and some commonly salvageable components give this blinking LED man a [...]
Versaloon can program hardware from several manufacturers Versaloon is an open source, USB connected project, that centers around an STM32 processor and provides a standard JTAG pinout. Above you see the Nano version which has a 10-pin JTAG connector, but there is also a 20-pin option on the Handy model. Great, another JTAG programmer. Well [...]
Kodak ZX3 teardown and Tetris [Sprite_TM] was given a Kodak ZX3 to play with by a forum he moderates. The Kodak ZX3 is a waterproof HD camcorder in a cell phone / mp3 player form factor. After opening up the camcorder, he did some poking around with a scope and was able to locate a serial port on the [...]
Repairing a broken RC ceiling fan The ceiling fan in [Steve Vigneau's] bedroom started giving him trouble. It is normally operated using a remote control but that functionality had become pretty spotty. He cleaned the contacts on the remote but still had troubles that could only be fixed by power-cycling the fan itself. When it [...]
Guerilla guide to CNC machining [Ian] wrote in to tell us about the Guerilla Guide to CNC Machining and Resin Casting. He came across it in the reference links to another project and says he wish he knew about it a long time ago. We took a look and there’s a mountain of useful information [...]
